Nitrous oxide filling Station

The following are commonly asked questions about Ny-Trex Nitrous Oxide Performance Systems, compiled by The Ny-Trex Research Team. These are typical of those fielded by Ny-Trex R&D and we hope that will be of help to all of those who seek the performance advantage.

Q: How does nitrous work?

A: Nitrous oxide is made up of 2 parts nitrogen and one-part oxygen (36% oxygen by weight). During the combustion process in an engine, at about 572 degrees F., nitrous breaks down and releases oxygen. This extra oxygen creates additional power by allowing more fuel to be burned. Nitrogen acts to buffer, or dampen the increased cylinder pressures helping to control the combustion process. Nitrous also has a tremendous "inter-cooling" effect by reducing intake charge temperatures by 60 to 75 degrees F.

Q: Will Nitrous affect engine reliability?

A: The key is choosing the correct H.P. for a given application. A kit that uses the correct factory calibration does not usually cause increased wear. As the energy released in the cylinder increases so do the loads on the various components that must handle them. If the load increases exceed the ability of the component to handle them, added wear takes place. Ny-Trex kits are designed for use on demand and only at wide-open throttle. Nitrous can be extremely advantageous in that it is only used when you want it, not all the time. All Ny-Trex kits are designed for maximum power with reliability for a given application.

Q: How long does it generally take to install a Ny-Trex kit?

A: The universal Ny-Trex kit can be installed using common hand tools in approximately 3 to 5 hours. The Ny-Trex instruction manual has step by step instructions; and include specific installation drawings, wiring diagrams, and bottle mounting procedures as well as performance tips and a thorough trouble shooting guide.

Q: How complete is a Ny-Trex kit?

A: Ny-Trex offers the most complete system on the market today. It includes virtually every component that may be needed for a complete installation; parts such as drill bits, pipe tap, fuel hose, brackets, fittings, thread sealer, hardware, wiring, 10 lb. Powder coated wet black bottle with Hi-Flo valve, complete instruction manual, and all other major components are standard in every Ny-Trex kit.