Aluminium oxide

We have deposited aluminium oxide films by atomic layer deposition on titanium oxide nanoparticles in a fluidized bed reactor at 27 ± 3 °C and atmospheric pressure. Working at room temperature allows coating heat-sensitive materials, while working at atmospheric pressure would simplify the scale-up of this process. We performed 4, 7 and 15 cycles by dosing a predefined amount of precursors, i.e., trimethyl aluminium and water. We obtained a growth per cycle of 0.14–0.15 nm determined by transmission electron microscopy (TEM), similar to atomic layer deposition (ALD) experiments at a few millibars and ~180 °C. We also increased the amount of precursors dosed by a factor of 2, 4 and 6 compared to the base case, maintaining the same purging time. The growth per cycle (GPC) increased, although not linearly, with the dosing time. In addition, we performed an experiment at 170 °C and 1 bar using the dosing times increased by factor 6, and obtained a growth per cycle of 0.16 nm. These results were verified with elemental analysis, which showed a good agreement with the results from TEM pictures. Thermal gravimetric analysis (TGA) showed a negligible amount of unreacted molecules inside the alumina films. Overall, the dosage of the precursors is crucial to control precisely the growth of the alumina films at atmospheric pressure and room temperature. Dosing excess of precursor provokes a chemical vapour deposition type of growth due to the physisorption of molecules on the particles, but this can be avoided by working at high temperatures.

MDPI and ACS Style

Valdesueiro, D.; Meesters, G.M.H.; Kreutzer, M.T.; van Ommen, J.R. Gas-Phase Deposition of Ultrathin Aluminium Oxide Films on Nanoparticles at Ambient Conditions. Materials 2015, 8, 1249-1263.

View more citation formats

AMA Style

Valdesueiro D, Meesters GMH, Kreutzer MT, van Ommen JR. Gas-Phase Deposition of Ultrathin Aluminium Oxide Films on Nanoparticles at Ambient Conditions. Materials. 2015; 8(3):1249-1263.

Chicago/Turabian Style

Valdesueiro, David; Meesters, Gabrie M.H.; Kreutzer, Michiel T.; van Ommen, J. R. 2015. "Gas-Phase Deposition of Ultrathin Aluminium Oxide Films on Nanoparticles at Ambient Conditions." Materials 8, no. 3: 1249-1263.

Notes: Multiple requests from the same IP address are counted as one view.

No

[Return to top]
Read electro-mechanical engineering blog
You might also like
Dot & Cross Diagram Aluminium Oxide
Dot & Cross Diagram Aluminium Oxide
Example of use of Aluminium Oxide Grinding Stones
Example of use of Aluminium Oxide Grinding Stones
Dronco aluminium oxide / corundum sharpening stone preview
Dronco aluminium oxide / corundum sharpening stone preview
Robert Bosch Tool Corporation Dremel 952 Aluminium Oxide Grinding Stone Model: 952 Tools & Home Improvement
BISS (Robert Bosch Tool Corporation)
  • High-quality industrial abrasive
  • Deburrs and grinds
  • Curved surfaces
  • Do not run in excess of 30, RPM
Aluminum Oxide Microdermabrasion Crystals to Exfoliate Your Facial Skin to Treat Age Spots, Acne, Wrinkles, Enlarged Pores, Black Heads, White Heads and Fine Lines, 1.5oz, Do Your Own Microdermabrasion At Home! from IQ Natural
Beauty (IQ Natural)
  • ** see the Promotional COUPONS listed below to save up to an extra 25% on this spa-quality at home microdermabrasion crystals treatment.
  • Simply mix a dime size of microdermabrasion crystals with your face soap and rub on.
  • GUARANTEED: 100% Satisfaction of these aluminum oxide microdermabrasion crystals or your Money Back
  • Dermatology quality microdermabrasion at home.
  • Treat Age spots, Acne, Wrinkles, Enlarged Pores, Blackheads, Whiteheads, Fine Lines
China White aluminium oxide Supplier/Manufacturer/Factory
China White aluminium oxide Supplier/Manufacturer/Factory
Lab Created Alexandrite beryllium aluminium oxide Colour
Lab Created Alexandrite beryllium aluminium oxide Colour ...
Aluminium Oxide Wiki Article
Aluminium Oxide Wiki Article
Dremel Dremel 954 1/4-Inch Cylinder Aluminum Oxide Grinding Stone
Home Improvement (Dremel)
  • Use on metals, castings, rivets, rust
  • Use for sharpening, deburring and general purpose grinding
  • 1/8 shank
  • Do not run in excess of 30, RPM
Dremel Dremel 953 Aluminium Oxide Grinding Stone
Home Improvement (Dremel)
  • High-quality industrial abrasive
  • Deburrs and grinds
  • Conic surfaces
  • Do not run in excess of 30, RPM
St. Gobain Norton Gemini Fast Cut Depressed Center Abrasive Wheel, Type 27, Aluminium Oxide, 5/8"-11 Hub, 4-1/2" Diameter x 1/4" Thickness (Pack of 10)
BISS (St. Gobain)
  • Aluminum oxide is durable and the most common abrasive grain
  • Type 27 depressed center wheels are used for cutting off and portable grinding
  • Reinforced design helps provide safety, strength, and straight cuts
  • Resin bonds soften under the heat of grinding, releasing dulled abrasive grains
  • Depressed center wheel for use on right angle grinders, also called angle grinders
Related Posts